B U N T I N G M A K I N G
Costume Makers Ball
Riley Blake Designs
makes this project so quick,
and so FUN!
Of course there are several ways that you can use this bunting panel.
I chose the no sew approach for a super quick finish.
For this you will need:
• One Costume Makers Ball bunting panel – 24″ x 43″
• Backing fabric – approximately 22″ x 43″
• Black 3/4″ wide gross grain ribbon, approximately 10 yards
• A medium weight, double sided fusible web product – approximately 22″ x 43″
• A package of fusible tape, approximately 10 yards
• Iron and pressing surface
Begin with your panel by cutting it in half, selvage to selvage. You can cut along the heavy dash lines on the outside of the two orange strips that separate the two rows of flags. This will leave a wider seam allowance at the tops of your flag sections.
Place your nine flag section on top of your fusible, paper side up. Trace the flag section with a marker or pencil and cut out. Sandwich them together glue side to back of fabric on your pressing surface. Make sure the fabric is a little larger than your fusible so you do not fuse to your surface or iron. Press according to manufacturer’s instructions.
Peel off the protective backing of your fusible product and place glue side to wrong side of your second, backing fabric. Again fuse together. Then your ready to cut the flags apart.
I designed this bunting outlining each flag with the same heavy dash lines to add a decorative edge and make cutting easier. You can use your rotary cutter or scissors to achieve a clean cut through your two fabric layers.
Once all of your flags are cut out you can fuse them to your ribbon. Lay them out in the order that you like and begin to fuse the ribbon to one top side of the flag. When you get close to the edge overlap just a bit and join the next one, until all are attached. Then turn your strand over and apply another layer of ribbon to the back for additional strength.
Then hang & enjoy!
They’re really fun to layer with batting and quilt some details too!
I hope my last two how to project posts were helpful. If I get up my courage maybe we’ll try a video!!
Now, that is SCARY!!!
We’re back from our two big events and eager to share.
First up is our big,
COSTUME MAKERS BALL
fabric by me, J. Wecker Frisch
from Riley Blake Designs
So many of you have asked if this fun fall project was a pattern so, we decided to share the easy process here!
I pretty much made this up as I went along and it was truly so easy. I’m still learning on the sewing front so, if you see anything that can be improved on, I’m interested to hear from you. Of course we love the images on the patch panel and they were the perfect sizes for the pages and pockets to hold whatever spooky items we found around the studio. Choose anything you like in your stash of old photos, tags, charms and trims to personalize your scary book.
What you’ll need, beginning with Costume Makers Ball fabric:
• One – Patch Panel for pages and pockets.
• One repeat – Border Stripe for a few fun tags to slip inside and attach.
• Fat quarter – Black Text for cover.
• 1/2 yard – Jac O Lantern Balloons on Black for inside of cover plus one page background.
• Fat eighth – Measure Tape Stripe Blk n Wt for one page.
• 1/2 yard – Riley Blake Linen in Natural for inside pages.
• Quilt batting, 1/2 to 3/4 yards based on preference. We used a light weight fusible behind page patches and cover.
• A medium weight Interfacing for a stiff cover cut to 17.5″ x 17.5″
• Measuring tape ribbon, buttons, decorative string, one cargo tag, old key & vintage notions or game cards, etc.
• Fabric only kits available exclusively at greatjoystudio.com/shop/
Pictures worth a thousand words?
Pages six & seven with quilted tags made using the CMB border stripe.
Sandwich each of the individual cover and (18″ square) page layers as you like. I chose batting between my cover fabrics and under each of the fabric patches. I then used a variety of sketchy stitches around each the page edges to create decorative borders and attach to the linen pieces. Using your skill level and imagination there are no limits to what you will create with these fantastic fabrics! Again, my stitching experience is short and some of these are my first attempts but I was pleased with the results. So remember, have fun, no rules, anything goes and you can’t make a mistake.
Here are the the page layouts:
Inside front cover & page 1
Pages 2 & 3
Pages 4 & 5
Pages 6 and 7 are pictured at top of post and are holding the border stripe kid tags.
Page 8 and inside back cover.
Not pictured is the outside cover! We used the CMB black allover text.
Complete Scary Book fabric kit available on the Shop page.
More Scary Book photos and fun projects on IG @jweckerfrisch and FB Joy Studio
Please share your scary book eye candy with us!!
Costume Makers Ball
is available NOW!
Just delivered to your favorite quilt shop,
from Riley Blake Designs.
And have we been plenty busy making,
Here is some of the fun we have had with our latest ‘Art to Applique’ designs.
We used Riley Blake Designs Confetti Cotton basics with Costume Makers Ball, to achieve the perfect blend for these projects.
was translated from the art in one of my classic Halloween collections. It is a vintage inspired, quick and easy fused appliqué design.
Did I mention FUN to make?!! Perfect for Trick or Treat bags, table runners and all fall decor.
This and MORE Joy Studio Design for Makers is available NOW on the Shop page:
Follow us on Instagram and Facebook to see all the new patterns and two, new FABRIC collections!!
our Man in the Moon and he is available now also at greatjoystudio.com
And . . . coming soon, a pattern for our Scary Book (below) made from Costume Makers Ball patch panel.
So, be sure to pick one up from your quilt shop.
This one is super FUN!
Once again we were off to Houston last week in October with our new fabric collection,
Costume Makers Ball
presented at Fall Quilt Market by
Riley Blake Designs.
Just in case you didn’t catch this on IG or FB I decided to share a few photos and info.
The collection is for Halloween, twenty-nineteen and delivers to shops in April.
These fabrics are available to the trade (shops) now so please, check with you local shops to make sure they’ll have in the Spring.
It’s a very fun group to work with and I’m thinking you will agree!
As you can see above, we’ve created some great projects for this line and they’ll become available with the fabric release.
You may also notice that we’ve dressed our Makers Guide She Who Sews girls up too and will be offering these Halloween appliqué add on’s as downloadables.
Oh yes, and we won a prize!
One to Riley Blake Designs for Best Multiple Booth award.
And we received the Most Creative Booth award.
And for a little extra touch, our live action model dressed as the main panel was in the booth on Saturday. A photo with her offered visitors a chance at some Paperdoll fat quarter bundles in a daily giveaway throughout the show.
To top it off, we enjoyed special guest, Jenny Doan from Missouri Star Quilting! Yay
It was all, quite a Treat.