Why is it called a minisew-a-long? Over three weeks I will be demonstrating the reverse raw edge appliqué technique used to make my All About Christmas Quilt & sewing along with you to make the three large snowmen blocks! Grab your supplies and sew along with me!
SCHEDULE:
July 7th: Learning the Reverse Raw Edge Appliqué Technique for top & bottom rows
July 14th: Snowman Blocks
July 21st: Snowman Blocks continued and wrap up
SUPPLIES:
To participate in this sew-a-long you will need my All About Christmas Quilt Pattern (or a quilt kit), All About Christmas & Painter’s Palette Fabric, and a few other appliqué supplies. See list below for retailers!
•
WHERE TO SHOP:
Check with your local quilt shop to find the supplies needed for this sew-a-long! You can find a store locator here. If your local shop is not carrying it, see list below for online retailers:
Did I miss your shop? Leave me a comment and I will add you to the list. If you are a quilt shop you can shop my patterns & fabrics from Riley Blake Designs. I can’t wait to sew-a-long with you right here on July 7th!
• Old Made fabric is our 2021 (non Halloween) Halloween collection delivering to shops now!
•
•
• Painters Watercolor Swirl fabric is our first Basics collection with Riley Blake Designs and is delivering now. It was chosen out of our Painters Palette fabric group which has joined the Riley Blake Designs Basics offerings!
•
•
• All About Christmas is scheduled to deliver in shops next month! And when we say ALL about Christmas, we mean Jesus! Complete with Him in a manger as the main panel. Also angels, camels, nativity, etc. You get the picture. Lol
•
•
•
• Riley Blake Designs Virtual Quilt Market is next week!!! We are presenting “Coffee Chalk” and “The Best of She Who Sews”!! Join this Facebook event here:
Since there is a lot of info to cover this last week will be in two parts.
Assuming that everyone has all of their blocks completed and trimmed or will have, it is time to assemble!
•
To start assembling the quilt portion, I cut five one and a half inch strips of Riley White fabric for the short sashing pieces. Check your pattern for accurate amounts if you want to cut all at once. I inched my way into this process, no pun intended.
From my five I cut eight and a half inch lengths, enough to attach my first couple of horizontal rows of blocks together. Refer to your pattern cover for block placement.
•
Beginning with block one (top left) lay one of your Riley White strips (1.5″ x 8.5″) on the right side of Block 1, right fabric sides together. Split the difference of the extra half inch between top and bottom of your block to be trimmed later.
•
Sew together using a quarter inch seam.
•
Press the seam toward your block.
•
Repeat the steps to connect block one and two together with this same sashing strip. This time lay block two on top of sashing strip lining up at right (see photo), again right fabric sides together, being careful to also line up both blocks top to bottom. You may want to pin in place before sewing.
•
Continue working this way until you have all of the top row of blocks connected. Then move on to row two!
•
And so on, until you have all of the blocks that connect using the short sashing pieces as shown on the pattern cover art. Seeing it all come together is the most fun for me, agreed?
I will post Part B on Saturday so stay tuned.
•
Embellish Options.
This festive project is loaded with possibilities to stitch on some fun extras! We plan to add buttons for our snowmen eyes and gingerbread man but remember to do this after your quilt top has been quilted.
I am happy to report that our piecing portion of our quilt is complete! Whew!!
•
A couple of items I should have mentioned earlier, pressing your seams. Always press as you go is highly recommended for a neat job and press the seams toward the darker fabric whenever possible.
•
And something I learned along the way to get my points closer to each other. Sew on the side that allows you to see your seam and stitch right across that. Who knew, not me. 😉
Below are the last four blocks that I saved until last. They appeared a bit more unfamiliar to me because of the corners which are all similar, and on an angle. However, following the sequence on the Pieced Blocks Guide in the pattern, I could quickly see that there was little to no difference in difficulty and all went smoothly as the others.
I think these are my best blocks to date! Perhaps I’m getting better the more I make.
In each block I did the corner work first. Once that was done, I attached pieces in the same sequence as all of the other blocks from Thursday’s post, horizontal rows. Last I attached the three horizontal rows from top to bottom, to complete.
Our gallery.
•
Row 1, block 2.
•
Row 4, block 3.
•
Row 6, block 1.
•
Row 7, block 6.
•
Trimming.
•
•
Trim each to eight inches, square for your seven and a half finish size blocks. In most cases ours only needed a smidgen cut off to clean up and even each block.
Again, voila!!
I feel quite accomplished or should I say quilt, and I hope you do too.
•
•
Again, share, share, share:
When posting photos use #snowalong and #snowsweetfabric in your social media so we can find/see your progress.
Let us know if you post on Pinterest as well and we’ll add to our board.
So, this is the part of the Snow-A-Long where it gets tricky for me,
PIECED BLOCKS.
I not an expert when it comes to constructing pieced blocks. On the contrary, I am a novice. I began learning two years ago and have limited experience. I cannot offer tips on how to get these blocks perfect or precise. The best way I can instruct you in this segment is to showhow we did it in a picture is worth a thousand words quilt block how to gallery, from a watercolor artist perspective rather than a quilter’s. It worked fairly well for us so no matter what your level of piecing skills is, I am confident that you can do this too.
First, using your two Pieced Blocks Guide sheets included in your pattern and the cover art for color, cut all of your fabrics according to the specified sizes in each of the 7.5″ (finish size) blocks. Our approach was block by block although, some of you experienced quilters may want to cut multiple blocks of the black and white fabrics, all at one time. The blocks are all two color classics so we found the majority were fairly simple to construct.
•
•
Once all of our fabric was cut we laid out each block’s pieces on pre-stretched artist canvases that we had on hand to use as our mini design boards. I hope to make some proper ones in the near future but these were just the right size and served our purpose.
We also labeled each board by row and block number with post-its. This helped us to keep everything organized until we were ready to sew. It will also help you to spot any mistakes that may have occurred during cutting too, as was the case in our first attempt! Can you spot them?
•
•
For our post photography we used these cool vintage price labels to show the quilt rows (top #) and blocks (bottom #).
I began with the blocks that were easiest for me to see how they could be assembled in horizontal rows but you can start with any of the blocks that you like. The design boards allow you to arrange the various pieces in advance to see how you think they look best. I tried wherever possible to have my text facing up and the pieces that were sideways, to be facing in the same direction.
•
Row 2, Block 6
We attached all of the half square triangles, B and C cuts together with a 1/4″ seam, shown in the first photo. Working from left to right we attached the top left two units together forming a horizontal, half square triangle double. Then we attached the two below those in the same way. After that, all four half square triangles were sewn together forming the top left corner unit of four half square triangles. Follow the same for the remaining three corners.
Attach the two top corner units to each side of your D cuts, and then bottom the same way. Attach the horizontal D cuts with center cut C. You will have three rows. Pin to match seams and working top to bottom attach all three rows together to complete the block.
•
Row 3, Block 1.
I started in the upper left corner making the small half square triangle by attaching E to B with a 1/4″ seam. Then added both of the dark triangles E to two sides of that unit forming a larger, 4 piece triangle. Again and throughout the quilt construction, we tried to maintain 1/4″ seams. To complete the corner unit I then sewed to the large white cut triangle A in the same way you made your first small, half square triangle. I repeated the steps for the remaining three corner units.
Then working from left to right attach top two corner units to D and repeat for the bottom corners. You will then have three horizontal rows. Last we pinned in place to attach all three rows together.
•
More of our picture is worth a thousand words quilt block gallery:
You can see that we followed a similar sequence for each of the remaining blocks. I attached all of the small half square triangles first as I moved from block to block.
•
I do not know the technical terms for block assembly so please excuse me quilters and please, interject your vast knowledge from experience in the comments! We would all love to learn more!
I have not included every block in this post but will add the remaining four in a follow up post.
I imagine that most of you following are able to quilt circles around me but I read somewhere once, “finished is better than perfect.” Jenny Doan I believe said that and I found it encouraging.
So, keep going!
And post photos with #snowalong and #snowsweetfabric in your social media so we can find/see your progress.
